Maintenance
AUTOMATIC TRANSAXLE (IF EQUIPPED)
WARNING - Transaxle fluid
The transaxle fluid level should be
checked when the engine is at nor-
mal operating temperature. This
means that the engine, radiator,
radiator hose and exhaust system
etc., are very hot. Exercise great
care not to burn yourself during this
procedure.
CAUTION
OMG075009
OMG075010
Checking the automatic transaxle
fluid level
3. Confirm that the fluid level is in “HOT”
range on the level gauge. If the fluid
level is lower, add the specified fluid
from the fill hole. If the fluid level is
higher, drain the fluid from the drain
hole.
• Low fluid level causes transaxle
slippage. Overfilling can cause
foaming,
loss
of
fluid
and
The
automatic transaxle fluid level
transaxle malfunction.
should be checked regularly.
• The use of a non-specified fluid
could result in transaxle malfunc-
tion and failure.
Keep the vehicle on the level ground with
the parking brake applied and check the
fluid level according to the following pro-
cedure.
4.
If the fluid level is checked in cold con-
dition (fluid temperature 68~86°F
(20~30°C)
add the fluid to “COLD” line
1.
Place the selector lever in N (Neutral)
position and confirm the engine is run-
ning at normal idle speed.
and then recheck the fluid level
according to the above step 2.
WARNING - Parking brake
To avoid sudden movement of the
vehicle, apply parking brake and
depress the brake pedal before
moving the shift lever.
2.
After the transaxle is warmed up suffi-
ciently (fluid temperature 158~176°F
(70~80°C)),
for example by 10 minutes
usual driving, shift the selector lever
through all positions then place the
selector lever in N (Neutral) or P (Park)
position.
“COLD” scale is for reference only
and should NOT be used to determine
transaxle fluid level.
7
16
| Categories | Kia Magentis Manuals, Kia Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)