2008 Kia Rondo Owners Manual

Safety features of your vehicle
C010104AUN
Headrest
The headrest  not only  provides  comfort
for  the  driver and  front  passenger,  but
also helps  to protect the  head and neck
in the event of a collision.
WARNING
For   maximum  effectiveness   in
case of an accident, the headrest
should be adjusted so the middle
of  the  headrest  is  at  the  same
height  as  the  top   of  the  occu-
pant's eyes. Also adjust the head-
rest so its distance from the head
is  as wide  as  your fist.  For  this
reason, the use of a  cushion that
holds  the   body  away  from   the
seatback is not recommended.
OUN028035
OUN028034
C010102AUN
C010103AUN
Seatback angle
To recline the seatback:
Seat cushion height (for driver’s seat)
To change the height of the seat cushion,
push the lever that is  located on the out-
side  of   the  seat   cushion  upwards  or
downwards.
•  To  lower  the  seat  cushion, push  the
lever down several times.
1.
2.
3.
Lean forward slightly and lift up on  the
seatback  recline lever  located on  the
outside of the seat at the rear.
Carefully  lean  back on  the  seat  and
adjust the  seatback of the  seat to the
position you desire.
Release the  lever and  make sure  the
seatback is locked in place. (The  lever
MUST return to its original  position for
the seatback to lock.)
•  Do  not  operate the  vehicle  with
the headrests removed as severe
injury   to   the    occupants   may
occur in the event of an accident.
Headrests  may   provide  protec-
tion  against  neck  injuries  when
properly adjusted.
•  To raise the seat cushion, pull the lever
up several times.
Do not adjust the headrest height
while the vehicle is in motion.
3
5
Product Specification
CategoriesKia Manuals, Kia Rondo Manuals
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 341 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field