Features of your vehicle
1.
•
POWER ON-OFF Control Knob
4. EQ Button
Then, by simply pressing the AM/FM
band select button and/or one of the six
station select buttons, you may recall any
of these stations instantly.To program the
stations, follow these steps:
The radio unit may be operated when
the ignition switch is in the "ACC" or
"ON" position. Press the button to
switch the power on. The LCD shows
the radio frequency in the radio mode,
CD/ MP3 track in the CD/MP3 mode.
To switch the power off, press the but-
ton again.
Press the EQ button to select the CLAS-
SIC, POP, ROCK, JAZZ and OFF MODE
for the desired tone quality. Each press of
the button changes the display as fol-
lows;
•
•
Press AM/FM selector to set the band
for AM, FM1 and FM2.
Select the desired station to be stored
by seek or manual tuning.
CLASSIC➟POP➟ROCK➟JAZZ➟OFF
•
Push the FM/AM or CD/MP3 to turn on
that function without pushing Power
ON-OFF control knob.
5.
AUTO SEEK Select Button
(Automatic Channel Selection)
• Determine the preset station select
button you wish to use to access that
station.
Press the AUTO SEEK select button.
When the side is pressed, the unit
will automatically tune to the next higher
frequency and when the side is
pressed, it will automatically tune to the
next lower frequency.
VOLUME Control
• Press and hold the station select button
for more than 0.8 seconds. A select but-
ton indicator will show in the display indi-
cating which select button you have
depressed. The frequency display will
flash after it has been stored in to the
memory.You should then release the but-
ton, and proceed to program the next
desired station. A total of 18 stations can
be programmed by selecting one AM and
two FM station per button.
Rotate the knob clockwise to increase
the volume and turn the knob counter-
clockwise to reduce the volume.
2.
BAND Select Button
Pressing the FM/AM button changes the
AM, FM1 and FM2 bands. The mode
selected is shown on the display.
6.
PRESET STATION Select Buttons
Six stations for AM, FM1 and FM2
respectively can be preset in the elec-
tronic memory circuit.
3.
RADIO SCAN Button
When you press the button, frequency is
HOW TO PRESET STATIONS
• When completed, any preset station
may be recalled by selecting AM, FM1
or FM2 band and the appropriate sta-
tion button.
changed
and the next channel is
Six AM and twelve FM stations may be
programmed into the memory of the
radio.
received automatically.
To stay on a station, press the SCAN but-
ton again.
4
106
| Categories | Kia Manuals, Kia Rondo Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)