Features of your vehicle
1.
•
POWER ON-OFF Control Knob
3. AUTO SEEK Select Button
(Automatic Channel Selection)
HOW TO PRESET STATIONS
The radio unit may be operated when
the ignition key is in the "ACC" or “ON”
position. Press the knob to switch the
power on. The LCD shows the radio
Six AM and twelve FM stations may be
programmed into the memory of the
radio. Then, by simply pressing the AM/
FM band select button and/or one of the
six station select buttons, you may recall
any of these stations instantly. To pro-
gram the stations, follow these steps:
Press the AUTO SEEK select button.
When the
side is pressed, the unit
will automatically tune to the next higher
frequency and when the side is
frequency
in the radio mode or
pressed, it will automatically tune to the
next lower frequency.
CD/MP3 track in the CD/MP3 mode or
CD AUTO CHANGER mode. To switch
the power off, press the knob again.
Push the FM/AM or CD/MP3 to turn on
that function without pushing Power
ON-OFF control knob.
•
Press AM/FM selector to set the band
for AM, FM1 and FM2.
4.
RADIO SCAN Button
•
When you press the button, frequency is
• Select the desired station to be stored
by seek or manual tuning.
changed
and the next channel is
received automatically.
•
Determine the preset station select
button you wish to use to access that
station.
To stay on a station, press the SCAN but-
ton again.
VOLUME Control
Rotate the knob clockwise to increase
the volume and turn the knob counter-
clockwise to reduce the volume.
•
Press and hold the station select but-
ton for more than 0.8 seconds. A select
button indicator will show in the display
indicating which select button you have
depressed. The frequency display will
flash after it has been stored into the
memory. You should then release the
button, and proceed to program the
next desired station. A total of 18 sta-
tions can be programmed by selecting
one AM and two FM station per button.
5.
EQ Button
Press the EQ button to select the CLAS-
SIC, POP, ROCK, JAZZ and OFF MODE
for the desired tone quality. Each press of
the button changes the display as fol-
lows;
2.
BAND Select Button
Pressing the FM, AM button changes the
AM, FM1 and FM2 bands. The mode
selected is shown on the display.
CLASSIC➟POP➟ROCK➟JAZZ➟OFF
6.
PRESET STATION Select Buttons
•
When completed, any preset station
may be recalled by selecting AM, FM1
or FM2 band and the appropriate sta-
tion button.
Six stations for AM, FM1 and FM2
respectively can be preset in the elec-
tronic memory circuit.
4
114
| Categories | Kia Manuals, Kia Rondo Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)