2008 Kia Rondo Owners Manual

Features of your vehicle
D010301AUN-EC
Limp home (override) procedure
When you  turn the ignition  switch to the
ON position,  if the  immobilizer  indicator
4. If all of the digits have been  input suc-
cessfully, you have  to start the engine
within  30  seconds. If  you  attempt  to
start the  engine after 30 seconds,  the
engine will not  start and you  will have
to input your password again.
After  performing  the  limp home  proce-
dure, you have to  see an authorized KIA
dealer immediately to  inspect and repair
your ignition key or immobilizer system.
CAUTION
Do  not change,  alter or  adjust  the
immobilizer    system    because    it
could  cause  the  immobilizer  sys-
tem to malfunction and should only
be  serviced  by  an authorized  KIA
dealer.
Malfunctions  caused  by   improper
alterations, adjustments  or  modifi-
cations  to the  immobilizer  system
are  not   covered  by   your  vehicle
manufacturer warranty.
(
)  goes  off  after  blinking 5  times,
your transponder equipped in the ignition
key is  out of  order. You cannot start  the
engine without the lime home procedure.
To  start  the  engine,  you have  to  input
your   password  by   using   the  ignition
switch.
The following  procedure is  how to  input
your password of “2345” as an example.
1.
Turn the ignition switch to the ON posi-
tion. The  immobilizer  indicator  (        )
This  device   complies  with  Industry
Canada standard RSS-210.
Operation is  subject to the following  two
conditions:
will blink  5 times  and go  off indicating
the beginning of  the limp home  proce-
dure.
Turn  the  ignition  switch  to  the  ACC
position.
2.
3.
1.
This  device  may  not  cause   harmful
interference, and
To enter the  first digit (in this  example
2.
This device  must accept  any  interfer-
ence  received,  including  interference
that may cause undesired operation.
“2”),
turn the ignition  switch to the ON
and  ACC position  twice.  Perform the
same  procedure   for  the  next   digits
between  3 seconds  and  10  seconds
(for example,  for “3”,  turn  the ignition
ON and ACC 3 times).
WARNING
Changes
or
modifications
not
expressly  approved   by  the   party
responsible  for  compliance  could
void the user's authority to  operate
the equipment.
4
5
Product Specification
CategoriesKia Manuals, Kia Rondo Manuals
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 341 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field