LATCH child-restraint
system
For child restraint devices with tether straps,
there are three additional attachment points,
refer to arrows, under covers in the floor of the
cargo area. Remove the corresponding cover
before use.
LATCH: Lower Anchor and Tethers for CHil-
dren.
For attachment and use of LATCH child-
restraint system, follow the operating and
safety instructions of the system manufac-
turer.<
Routing of tether strap
Make sure that the tether strap is not
routed over sharp objects and does not
twist on its way to the attachment point; other-
wise, the belt can fail to properly secure the
child restraint device in the event of an acci-
dent.<
Before attaching the child's seat, pull the belt
out of the vicinity of the child's seat attachment
points.
Make sure that the LATCH anchors have
correctly engaged and the child restraint
device is resting snugly against the backrest.<
Rear seats
The anchorage points for the LATCH mounts
are located behind the cover caps. Before
installing the child's seat, pull the cover caps
out toward the front.
Child restraint device with tether strap
1
2
3
4
5
6
7
Direction of travel
Head restraint
The top tether strap attachment points
are only intended for attachment of child
restraint device; other uses can damage the
attachment points.<
Child restraint device tether strap
Tether strap hook
Cargo area floor
Attachment point
Backrest
Before using the attachment points, remove the
cover caps.
36
Online Edition for Part no. 01 41 2 601 104 - © 08/08 BMW AG
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW E83, BMW X3 xDrive28i, BMW X3 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)