After releasing the brake, start driving immedi-
ately; otherwise, the acceleration assistant will
no longer hold the vehicle after approx.
>
When driving with snow chains*
When driving with a compact wheel, the Flat
Tire Monitor cannot operate.
2
seconds and the vehicle will start to roll back-
ward.<
Initializing system
The initialization is completed while driv-
ing and can be interrupted at any time.
The initialization automatically continues when
driving resumes.
Do not initialize the system when driving with
snow chains* or with a compact wheel.<
Malfunction
The warning lamp for the brake system
lights up in yellow. The acceleration
assistant has failed. The vehicle will not
be held after the brake is released. Have the
system checked as soon as possible.
1.
Start the engine just before driving, but do
not begin to drive.
Flat Tire Monitor FTM*
2.
Press the button for at least 4 seconds, but
not longer than 2 minutes. After the button
is released, the indicator lamp in the instru-
ment cluster lights up yellow for a few sec-
onds.
The concept
The Flat Tire Monitor detects a pressure loss in
a tire based on comparing the speeds of the
individual wheels while driving.
In the event of a pressure loss, a change occurs
in the rolling circumference and therefore the
rotation speed of the corresponding wheel.
This change is detected and signaled as a flat
tire.
Functional requirement
To ensure the reliable signaling of a flat tire, the
system must be initialized at the correct tire
inflation pressure.
3.
Begin driving.
The initialization is completed while driving,
without requiring any further input from you.
The initialization must be carried out after
each correction of the tire inflation pres-
sure and after every tire or wheel change.<
Indication of a flat tire
The warning lamp lights up red. In addi-
System limits
tion, an acoustic signal sounds. There is
a flat tire or extensive inflation pressure
The Flat Tire Monitor cannot predict sud-
den severe tire damage caused by out-
side factors and does not detect a natural, even
pressure drop in all four tires.<
loss.
1.
Reduce speed and stop the vehicle care-
fully. Avoid sudden braking and steering
maneuvers.
In the following situations, the system could be
delayed or malfunction:
2.
Identify damaged tire.
>
>
When the system has not been initialized
If identification is not possible, con-
tact your BMW Sports Activity Vehi-
cle Center.<
When driving on snow-covered or slippery
road surfaces
3.
Replace the damaged wheel, refer to
Wheel changes on page 116.
>
Sporty driving style: slip in the drive wheels,
high lateral acceleration.
54
Online Edition for Part no. 01 41 2 601 104 - © 08/08 BMW AG
Categories | BMW Manuals, BMW X3 Manuals |
---|---|
Tags | BMW E83, BMW X3 xDrive28i, BMW X3 xDrive30i |
Model Year | 2009 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)