463_AKB;
d2ureepe,
2; 52, en-US
2008-12-02T10:52:11+01:00 - Seite 230
Version: 2.11.7.1
Replacing bulbs
230
X Insert the bulb socket back into side
marker lamp housing;.
X Reinstall dust cover=.
X Reinstall side marker lamp housing;.
X Install and tighten securing screws:.
i Do not overtighten securing screws:.
Otherwise side marker lamp housing;
could be damaged.
Example illustration: Left tail lamp lens (right tail
lamp lens laterally reversed)
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following:
X Loosen and remove securing screws:.
X Remove tail lamp lens;.
X Switch off the ignition.
X Turn the exterior lamp switch to position
$
.
Removing/installing rear lamp guard
(G 55 AMG only)
Example illustration: Left tail lamp unit (right tail
lamp unit laterally reversed)
= Turn signal lamp bulb
? Brake, tail, parking and standing lamp
bulb
A Tail, parking and standing lamp bulb
X Remove screws;.
X Swivel rear lamp guard: outward. Make
sure the guard does not strike painted
surfaces.
X Swivel rear lamp guard: back after
X Gently press onto respective bulb=,?,
orA and turn counterclockwise out of its
bulb socket.
X Gently press the new bulb into the bulb
socket and turn clockwise until it engages.
X Reinstall tail lamp lens;.
replacing bulbs and fasten it with
screws;.
X Install and tighten securing screws:.
Tail lamp unit
X G 55 AMG only: Remove the rear lamp
guard.
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)