Things to remember when driving
Break-in period
Following part replacement
The same break-in procedures should be
observed if any of the components mentioned
above have to be renewed in the course of the
vehicle's operating life.
Moving parts need breaking-in time to adjust to
each other. Please follow the instructions below
in order to achieve the optimal service life and
economy of operation for your vehicle.
Engine and differential
Saving fuel
Always obey all official speed limits.
The fuel consumption of your vehicle depends
on several factors. You can lower fuel consump-
tion and the environmental impact by taking
certain measures, adjusting your driving style
and having the vehicle serviced regularly.
Up to 1,200 miles/2,000 km
Drive at varying engine and road speeds but do
not exceed:
>
Gasoline engine
4,500 rpm or 100
mph/160 km/h
Remove any unneeded cargo
>
Diesel engine
Additional weight increases fuel consumption.
3,500 rpm or 93
mph/150 km/h
Avoid full-throttle operation and use of the
transmission's kickdown mode.
Remove any mounted parts after you
have finished using them
Remove unneeded additional mirrors, the roof
rack and the rear luggage rack after use.
Mounted parts affect the vehicle's aerodynam-
ics and increase fuel consumption.
After driving 1,200 miles/2,000 km
Engine and vehicle speeds can be gradually
increased.
Tires
Close the windows and glass roof
Due to technical factors associated with their
manufacture, tires do not achieve their full trac-
tion potential until after an initial break-in
period. Therefore, drive cautiously during the
first 200 miles/300 km.
An open glass roof or window causes higher air
resistance and thus increases fuel consump-
tion.
Check tire inflation pressure regularly
Check the tire inflation pressure at least twice a
month and before embarking on a long journey,
and correct it if necessary.
Brake system
Brakes require an initial break-in period of
approx. 300 miles/500 km to achieve optimized
contact and wear patterns between brake pads
and rotors. Drive cautiously during this break-in
period.
Low tire inflation pressure causes higher rolling
resistance and thus increases fuel consumption
and tire wear.
Set off immediately
Clutch
Do not let the engine warm up while the car is
still standing, but set off immediately at moder-
ate engine speed. This is the fastest way for the
cold engine to reach its operating temperature.
The function of the clutch reaches its optimal
level only after a distance driven of approx.
500
km. During this break-in period, engage the
clutch gently.
106
Online Edition for Part no. 01 41 2 602 977 - © 08/09 BMW AG
| Categories | BMW 3-Series Manuals, BMW M3 Manuals, BMW Manuals |
|---|---|
| Tags | BMW 328i, BMW 328xi, BMW 335i, BMW 335xi, BMW E90, BMW E91, Wagon |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2010 BMW 3 Series Sedan Owners Manual 4.0 out of 4.0 based on 1 product reviews. Very Good format, easy to understand. Almost is 100% in English with a few German-isms......
Very Informative.