>
If the high-beam assistant switches on the
high beams, but you would like to drive with
the low beams, simply switch off the high
beams using the turn indicator lever. This
deactivates the high-beam assistant.
To reactivate the system, briefly push the
turn indicator lever toward the high beams
again.
a cloth moistened with a small amount of
glass cleaner.
Fog lamps
>
If the high-beam assistant switches on the
low beams, but you would like to drive with
the high beams, switch on the high beams
as usual. This deactivates the system and
the high beams need to be switched off
manually, if necessary.
To reactivate the system, briefly push the
turn indicator lever toward the high beams
again.
The parking lamps or low beams must
be switched on for the fog lamps to
operate. The green indicator lamp in
the instrument cluster lights up whenever the
fog lamps are on.
>
Use the headlamp flasher as usual with the
low beams switched on.
System limitations
The fog lamps are switched off while you acti-
vate the headlamp flasher or switch on the high
beams.
The high-beam assistant cannot serve as
a substitute for the driver's personal judg-
ment of when to use the high beams. Therefore,
manually switch off the high beams in situations
where this is required to avoid a safety risk.<
If the automatic headlamp control is acti-
vated, the low beams will come on auto-
matically when you switch on the fog lamps.<
The system is not fully functional in situations
such as the following, and driver intervention
may be necessary:
Instrument lighting
>
In very unfavorable weather conditions,
such as fog or heavy precipitation
You can adjust the brightness of the instrument
lighting only when the parking lamps or the low
beams are switched on.
>
In detecting poorly-lit road users, such as
pedestrians, cyclists, horseback riders and
wagons; when driving close to train or ship
traffic; and at animal crossings
>
>
In tight curves, on hilltops or in depressions,
in cross traffic or half-obscured oncoming
traffic on highways
In poorly lit towns and cities and in the pres-
ence of highly reflective signs
>
>
At low speeds
When the windshield in front of the interior
rearview mirror is fogged over, dirty or cov-
ered with stickers, etc.
1.
2.
Push button 1 up or down repeatedly until
the appropriate symbol appears in the dis-
play, accompanied by the brightness set-
ting and scale the word "SET".
>
If the sensor is dirty. Clean the sensor on
the front of the interior rearview mirror using
Press button 2.
82
Online Edition for Part no. 01 41 2 602 977 - © 08/09 BMW AG
| Categories | BMW 3-Series Manuals, BMW M3 Manuals, BMW Manuals |
|---|---|
| Tags | BMW 328i, BMW 328xi, BMW 335i, BMW 335xi, BMW E90, BMW E91, Wagon |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2010 BMW 3 Series Sedan Owners Manual 4.0 out of 4.0 based on 1 product reviews. Very Good format, easy to understand. Almost is 100% in English with a few German-isms......
Very Informative.