Changing low-beam and high-beam
bulbs
Turn signals, front
PY24W bulb, 24 watts
1.
Remove the relevant cover for the head-
lamp.
1.
Open the flap in the wheel well, refer to
Access through the wheel well on
page 149.
2.
3.
Disconnect the plug from the lamp.
Push the wire bracket to the side out of the
mounting, arrow 1, and fold it down,
arrow 2.
2.
3.
Rotate turn signal bulb socket 1 to the left
and remove.
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
4.
5.
Remove the bulb.
Insert new bulb as shown in the detail of the
illustration above.
4.
5.
Insert turn signal bulb socket 1.
6.
7.
8.
Fold up the wire bracket and engage it.
Connect the plug.
Attach the flap to the wheel well.
Tail lamps
Sedan
Reattach the cover.
Parking lamps, roadside parking lamps
>
>
>
Brake lamp in the trunk lid:
H21W bulb, 21 watts
W5W bulb, 5 watts
1.
Remove the cover for the high-beam head-
lamp.
Backup lamp:
W16W bulb, 16 watts
2.
Pull out the bulb socket, see arrow.
Other lamps:
P21W bulb, 21 watts
The tail lamps are divided in two parts. One part
is in the trunk lid, the other is in the fender.
3.
4.
5.
Remove and replace the bulb.
Insert bulb socket.
Reattach the cover.
1
2
Brake lamp
Roadside parking lamp/tail lamp, LED
150
Online Edition for Part no. 01 41 2 602 977 - © 08/09 BMW AG
| Categories | BMW 3-Series Manuals, BMW M3 Manuals, BMW Manuals |
|---|---|
| Tags | BMW 328i, BMW 328xi, BMW 335i, BMW 335xi, BMW E90, BMW E91, Wagon |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2010 BMW 3 Series Sedan Owners Manual 4.0 out of 4.0 based on 1 product reviews. Very Good format, easy to understand. Almost is 100% in English with a few German-isms......
Very Informative.