lamps are active and illuminate the outer area of
curves.
stantly switching back and forth and simulta-
neously provides you with the best possible vis-
ibility. Naturally, you can intervene at any time to
switch the high beams on and off as usual.
High beams/
roadside parking lamps
Activating system
1.
Turn the light switch to position 3, refer to
page 100.
2.
With the low beams switched on, briefly
press the turn signal lever in the high-beam
direction.
1
2
3
High beams
Headlamp flasher
Roadside parking lamps*
Roadside parking lamps, left or right*
The indicator lamp in the instrument
cluster lights up when the High-beam
Assistant is activated. The system
You also enjoy the option of lighting up just one
side of your vehicle when parking.
automatically switches between high beams
and low beams, reacting to oncoming traffic,
vehicles ahead of you, and sufficiently lit areas,
e.g., in built-up zones.
Switching on
After parking the vehicle, press the lever up or
down beyond the resistance point, arrow 3.
The roadside parking lamps drain the bat-
tery. Do not leave them switched on for
long periods of time, otherwise it may no longer
be possible to start the engine.<
Manually switching between high
beams and low beams
If you wish or the situation requires, you can
intervene at any time.
Switching off
If the High-beam Assistant has switched on
the high beams, but you wish to use the low
beams, just switch on the low beams with
the turn signal lever. This deactivates the
High-beam Assistant.
>
Briefly press the lever in the opposite direction
up to the resistance point, arrow 3.
High-beam Assistant*
In order to reactivate the system, briefly
press the turn signal lever in the high-beam
direction.
The concept
>
If the High-beam Assistant has switched on
the low beams, but you wish to use the high
beams, simply switch on the high beams as
usual. This deactivates the system and it is
up to you to switch back to low beams.
In order to reactivate the system, briefly
This system automatically switches the high
beams on and off. A sensor on the front side of
the inside rearview mirror controls the process.
The assistant makes sure that the high beams
are switched on whenever traffic conditions
permit. This relieves you of the burden of con-
102
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 528i, BMW 535i, BMW 550i, BMW E60, BMW E61 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2010 BMW 5-Series Sedan 528i 535i 550i 528i xDrive 535i Owners Manual 3.0 out of 3.0 based on 1 product reviews. its alrighyt