The adjustment of the lumbar support is not
stored in the memory.
When using this feature, always make
sure that the footwell behind the driver's
seat is empty and unobstructed. Failure to do
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.<
Storing
1.
2.
3.
4.
Switch on radio readiness or ignition, refer
to page 57.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
Set the desired seat, exterior mirror and
steering wheel positions.
Press the
button:
The LED in the button lights up.
Selecting automatic call-up
Press the desired memory button 1 or 2:
iDrive, for operating principle refer to page 16.
The LED goes out.
1.
2.
3.
"Settings"
Requesting
"Door locks"
Do not request a position from the mem-
"Last seat position auto."
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.<
Comfort mode
1.
Open the driver's door after unlocking or
switch on radio readiness.
2.
Briefly press the desired memory button 1
or 2.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
The function for automatically calling up
the last seat position is switched on and is
stored for the remote control currently in use.
Safety feature
Switching off automatic call-up
1.
Close the driver's door and switch the igni-
tion on or off.
Deactivate "Last seat position auto.".
2.
Press the desired memory button 1 or 2
and keep it pressed until the adjustment
process has been completed.
Head restraints
A correctly adjusted head restraint reduces the
risk of spinal injury in the event of an accident.
If the
press the button again; the LED goes out.
button was pressed inadvertently:
Adjust the head restraint so that its center
is approximately at ear level. Otherwise
Requesting with remote control
there is increased danger of injury in the event
of an accident. Only remove the head restraints
if no one will be sitting on the seat in question.
Reinstall the head restraints before transport-
ing passengers, as otherwise the head restraint
cannot provide its protective function.<
The last positions of the driver's seat, the exte-
rior rearview mirrors, and steering wheel are
stored for the remote control currently in use.
You can choose when the position is requested:
>
>
Request when unlocking vehicle
Request when opening driver's door
46
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 528i, BMW 535i, BMW 550i, BMW E60, BMW E61 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2010 BMW 5-Series Sedan 528i 535i 550i 528i xDrive 535i Owners Manual 3.0 out of 3.0 based on 1 product reviews. its alrighyt