Air volume, manual
mode. The maximum air volume flows out of the
vents for the upper body. Therefore, open these
vents for maximum cooling.
You can adjust the air volume by
turning. You can reactivate the
automatic mode for the air volume
with the AUTO button.
AUC Automatic recirculated-air
control/recirculated-air mode
The air volume is reduced to save battery
power. The display stays the same.
You can respond to pollutants or
unpleasant odors in the immediate
environment by suspending the
Air distribution, manual
supply of outside air. The system then recircu-
lates the air currently within the vehicle. During
AUC operation, a sensor detects pollutants in
the outside air and controls the shut-off auto-
matically.
You can route the air flowing out into the vehicle
interior via various programs, separately for the
driver's and passenger's side:
>
>
>
>
Upper body region
Upper body region and footwell
Footwell
By pressing the button repeatedly, you can
request three operating modes:
Driver's side: windows and footwell
>
>
LED off: outside air flows in continuously.
Right LED on, AUC mode: the system
detects pollutants in the outside air and
shuts off the supply as needed.
Selecting program
Press the button repeatedly until
the desired air distribution of the
respective program is shown on
the Control Display.
>
Left LED on, recirculated-air mode: the
supply of outside air is permanently shut off.
Should the windows fog up in the recircu-
lated-air mode, press the AUTO button or
Switching cooling function on and off
switch off the recirculated-air mode and
increase the air volume if necessary.
The recirculated-air mode should not be used
over an extended period of time, as the air qual-
ity inside the vehicle deteriorates continu-
ously.<
The cooling function cools and
dehumidifies the incoming air
before also reheating it as
required, according to the temperature setting.
This function is only available when the engine
is running.
The cooling function helps to avoid condensa-
tion on the window surfaces or to quickly
remove them.
Residual heat
The heat stored in the engine is
used to heat the passenger com-
partment, e.g., while stopped at a
school to pick up a child.
Depending on the weather, the windshield may
fog over briefly when the engine is started.
The cooling function is also switched on with
the AUTO program.
1.
2.
Switch off the engine.
Turn to the right, refer to arrow.
The function can be switched on when the fol-
lowing conditions are met:
Maximum cooling
Maximally cooled air is obtained as
quickly as possible at an outside
temperature above approx. 327/
>
up to 15 minutes after switching off the
engine
>
>
with engine at operating temperature
with sufficient battery voltage
0
6 and with the engine running.
At the lowest temperature, the automatic cli-
mate control switches into recirculated-air
107
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 528i, BMW 535i, BMW 550i, BMW E60, BMW E61 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2010 BMW 5-Series Sedan 528i 535i 550i 528i xDrive 535i Owners Manual 3.0 out of 3.0 based on 1 product reviews. its alrighyt