Air distribution, manual
The cooling function is switched on automati-
cally with the AUTO program.
You can use various programs to separately
direct the emerging airflow to the driver and
passenger side of the vehicle interior.
Maximum cooling
Maximally cooled air is obtained as
quickly as possible at an outside
temperature above approx. 327/
>
>
>
>
Upper body region
Upper body region and footwell
Footwell
06
and with the engine running.
Driver's side: also the windshield, side win-
dows, and footwell
The automatic climate control switches into the
recirculated-air mode at the lowest tempera-
ture. The maximum air volume flows out of the
air vents for the upper body. Therefore, open
these vents for maximum cooling.
Selecting program
Press the button repeatedly until
the desired program is shown on
the Control Display.
AUC Automatic recirculated-air
control/recirculated-air mode
You can respond to pollutants or
unpleasant odors in the immediate
environment by suspending the
supply of outside air. The system
then recirculates the air currently within the
vehicle. During AUC operation, a sensor
detects pollutants in the outside air and con-
trols the shut-off automatically.
By pressing the button repeatedly, you can
request three operating modes:
1
2
3
Air toward the windshield and side windows
Air for the upper body
>
>
LED off: outside air flows in continuously.
Left LED on, AUC mode: the system
detects pollutants in the outside air and
shuts off the supply as needed.
Air to footwell
Pressing the AUTO button cancels the
manual air distribution settings.<
>
Right LED on, recirculated-air mode: the
supply of outside air is permanently shut off.
The automatic mode for the air volume remains
effective with manual air distribution.
Should the windows fog up in the recircu-
lated-air mode, press the AUTO button or
Switching cooling function on and off
switch off the recirculated-air mode and
increase the air volume if necessary.
The recirculated-air mode should not be used
without interruption over an extended period of
time, as the air quality inside the vehicle deteri-
orates continuously.<
The cooling function cools and
dehumidifies the incoming air
before also reheating it as
required, according to the temperature setting.
This function is only available when the engine
is running.
The cooling function helps to avoid condensa-
tion on the window surfaces or to quickly
remove them.
Residual heat
The heat stored in the engine is used to heat the
passenger compartment, e.g. while stopped at
a school to pick up a child.
Depending on the weather, the windshield may
fog over briefly when the engine is started.
110
Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW E72, BMW X5 M, BMW X5 xDrive30i, BMW X5 xDrive35d, BMW X5 xDrive48i, BMW X6 M, BMW X6 xDrive 35i, BMW X6 xDrive 50i |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)