The roof closes without the pinch protection
system.
Following interruptions in electrical
power supply
After a power loss, the sunroof may only
respond to the raise command. Then have the
system initialized. BMW recommends having
this work carried out by your BMW Sports
Activity Vehicle Center.
4.
Insert the Allen wrench* from the onboard
tool kit, refer to page 250, into the opening
provided. Move the panorama glass sunroof
in the desired direction.
Moving manually*
In the event of an electrical malfunction, you can
move the sunroof manually:
1.
Remove trim piece. To do so, gently lift the
corner of the trim piece with a screwdriver.
5.
6.
Reconnect the plug.
Clip the trim piece into the cover panel,
arrow 1. Then fold the cover panel forward
until it audibly clicks into place, arrow 2.
2.
Using the screwdriver, press in the clamps
one after the other, arrows 1, tilt the cover
panel down, arrow 2, and remove.
BMW X6: glass sunroof*,
electric
3.
Release and disconnect the motor plug.
This significantly reduces the effort
required for the manual movement.
The glass sunroof is ready for operation when
the ignition is switched on, refer to page 59.
To prevent injuries, exercise care when
closing the glass sunroof and keep it in
your field of vision until it is closed.
Always take along the remote control when you
40
Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW E72, BMW X5 M, BMW X5 xDrive30i, BMW X5 xDrive35d, BMW X5 xDrive48i, BMW X6 M, BMW X6 xDrive 35i, BMW X6 xDrive 50i |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)