2010 Hyundai Getz Owners Manuals

6-
16 DO-IT-YOURSELFMAINTENANCE
G110D02TB-GAT
Checking
the
transaxle fluid level
automatic
!
WARNING:
Fluid level  should be within
HOT" range
The cooling fan is controlled by en-
gine coolant temperature and may
sometimes operate even when the
engine is not running. Use extreme
caution   when  working   near  the
bladesofthecoolingfan,sothatyou
are  not  injured by  a  rotating  fan
blade.Astheenginecoolanttemper-
ature decreases, the  fan will auto-
matically shut off. This is a normal
condition.
"
C090A03FC
3
. Confirm  if the  fluid level  is  in the
HOT” range on the level gauge. If
HTB164
thefluidlevelislower,addthespeci-
fied fluid from the fill hole. If the fluid
levelishigher,drainthefluidfromthe
drainhole.
If the fluid  level is checked in  cold
condition[fluidtemperature20~30°C
(68~86°F)],addthefluidtothe“COLD”
line and then recheck the fluid level
according to the above step 2.
The  automatic  transaxle  fluid   level
should be checked regularly.
Keep the vehicle on level ground with
theparkingbrakeappliedandcheckthe
fluid level  according to  the following
procedure.
4.
1
. Place  the shift  lever in  N(neutral)
position and confirm  the engine is
running at idle speed.
2.
After  the transaxle  is  warmed up
sufficiently     [fluid    temperature
70~80°C(158~176°F)],forexample
by 10 minutes usual driving,  move
the shift lever through all  positions
thenplacetheshiftleverinN(neutral)
or P(park) position.
Product Specification
Categories Hyundai Manuals, Hyundai Getz Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 256 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Getz
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field