2010 Hyundai H 100 Owners Manual

3
WHAT TO DO IN AN EMERGENCY
14
D060H02O-AAT
7. Re-install Wheel Nuts
D060I01HR-GAT
8. Lower Vehicle and Tighten
Nuts
Tightening torque:
Front
Rear
15
to 20 kg.m
12 to 14 kg.m
(118 to 137 N.m,
87 to 101 lbs.ft)
15 to 20 kg.m
(147 to 196 N.m,
108 to 145 ft.lbs)
Low
(147
108
to 196 N.m,
Deck
to 145 ft.lbs)
15
to 20 kg.m
High
(147
to 196 N.m,
to 145 ft.lbs)
Deck
108
D060H01HR
To reinstall  the wheel, hold  it on the
studs, put the wheel nuts on the studs
and tighten them finger tight. The nuts
should  be  installed  with  their small
diameter ends directed inward. Jiggle
the  tire  to  be  sure  it  is completely
seated, then tighten the nuts as much
as possible with your fingers again.
OHR058118
Lower the car to the ground by moving
the jack  handle up  and  down. Then
position the  wrench as shown  in the
drawingandtightenthewheelnuts.Be
sure the socket  is seated completely
over  the  nut.  Do  not  stand  on  the
wrench  handle or  use  an extension
pipe over the wrench handle.
Go around the wheel tightening every
other nut until they are all  tight. Then
double-check each  nut for tightness.
After changing wheels, have a techni-
cian  tighten the  wheel  nuts  to their
proper torque as soon as possible.
Product Specification
Categories Hyundai Manuals, Hyundai H-100 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 207 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, H-100
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field