2010 Hyundai I10 Owners Manual

Features of your vehicle
D230503APA
NOTICE
•  During  air conditioning  system opera-
tion,  you  may   occasionally  notice  a
slight change  in engine  speed  as the
air   conditioning  compressor   cycles.
This  is   a  normal   system   operation
characteristic.
Air conditioning (if equipped)
When using  the air  conditioning sys-
tem,  monitor the  temperature  gauge
closely  while  driving   up  hills  or  in
heavy  traffic  when outside  tempera-
tures  are high.  Air  conditioning  sys-
tem operation may cause engine over-
heating.  Continue  to  use the  blower
fan but  turn the air  conditioning sys-
tem off if the temperature gauge  indi-
cates engine overheating.
All  HYUNDAI Air  Conditioning  Systems
are  filled   with  environmentally  friendly
R-134a refrigerant  which does not dam-
age the ozone layer.
1.
Start  the engine.  Push the  air  condi-
tioning button.
•  Use the  air conditioning  system every
month only for a few minutes to ensure
maximum system performance.
2.
3.
Set the mode to the
position.
•  When  using  the air  conditioning  sys-
tem, you  may notice  clear water  drip-
ping (or  even puddling) on the  ground
under the  passenger side of  the vehi-
cle. This is a  normal system operation
characteristic.
Set the air intake control to the outside
air or recirculated air position.
When opening the  windows in humid
weather  air conditioning  may  create
water   droplets   inside   the   vehicle.
Since  excessive   water  droplets  may
cause damage to electrical equipment,
air  conditioning  should  only  be  run
with the windows closed.
4.
Adjust the fan  speed control and tem-
perature control to  maintain maximum
comfort.
When maximum cooling is desired, set
the temperature control to the extreme
left position, set the air intake control to
the  recirculated air  position,  then  set
the  fan  speed  control  to the  highest
speed.
Operating the  air  conditioning system
in the recirculated air position provides
maximum  cooling, however,  continual
operation in  this mode may  cause the
air inside the vehicle to become stale.
Air conditioning system operation tips
During   cooling  operation,   you   may
occasionally  notice   a  misty  air   flow
because of rapid cooling and humid air
intake. This is a normal  system opera-
tion characteristics.
If the vehicle has been parked in direct
sunlight during  hot weather,  open the
windows for a  short time to  let the hot
air inside the vehicle escape.
To help  reduce moisture  inside of  the
windows   on   rainy  or   humid   days,
decrease the humidity  inside the vehi-
cle  by  operating  the  air  conditioning
system.
4
64
Product Specification
Categories Hyundai Manuals, Hyundai i10 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 354 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, i10
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field