Maintenance
Position light bulb
1.
Remove the socket from the assembly
by pulling it out.
2.
Remove the bulb by pulling it straight
out.
Insert a new bulb into the socket.
3.
4.
Install the socket into the assembly by
pushing it in.
Turn signal light bulb
1.
Remove the socket from the assembly
by turning the socket counter clock-
wise until the tabs on the socket align
with the slots on the assembly.
OPA077056
OPA077037
G220102APA
G220200APA
Side repeater light bulb replace-
ment (if equipped)
Front fog light bulb replacement
1.
2.
Remove the bulb from the socket by
pressing it in and rotating it until the
tabs on the bulb align with the slots in
the socket. Pull the bulb out of the
socket.
Reach your hand into the front
bumper.
Type A
2. Remove the socket from the housing
by turning the socket counter clock-
wise until the tabs on the socket align
with the slots on the housing.
1. Remove the light assembly from the
body of the vehicle by prying the lens
and pulling the assembly out.
3.
4.
Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
2. Disconnect the bulb electrical connec-
tor.
3. Remove the bulb by pulling it straight
out.
4. Install a new bulb in the socket.
Install the socket into the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
3. Separate the socket and the lens part
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the lens part.
5. Install the socket in the housing by
aligning the tabs on the socket with the
slots in the housing. Insert the socket
into the housing and turn the socket
clockwise.
4. Remove the bulb by pulling it straight
out.
7
66
| Categories | Hyundai Manuals, Hyundai i10 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i10 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)