What to do in an emergency
Using the TireMobilityKit
Filling the sealant
9) Switch off the compressor.
1.
10) Detach the hoses from the
sealant bottle connector and
from the tire valve.
Strictly
follow
the
specified
sequence, otherwise the sealant
may escape under high pressure.
Return the TireMobilityKit to its stor-
age location in the vehicle.
1)
2)
Shake the sealant bottle.
Screw connection hose 9 onto the
connector of the sealant bottle.
WARNING
Carbon monoxide poisoning
and suffocation is possible if the
engine is left running in a poorly
ventilated or unventilated loca-
tion (such as inside a building).
3)
4)
Ensure that button 8 on the com-
pressor is not pressed.
Unscrew the valve cap from the
OYN069018
valve of the defective wheel and 6) Ensure that the compressor is
screw filling hose 2 of the sealant
bottle onto the valve.
switched off, position 0.
7)
Connect between compressor
and the vehicle power outlet using
the cable and connectors.
5)
Insert the sealant bottle into the
housing of the compressor so that
the bottle is upright.
8)
With the ignition switched on:
Switch on the compressor and let it
run for approximately 3 minutes to fill
the sealant. The inflation pressure of
the tire after filling is unimportant.
6
17
| Categories | Hyundai Manuals, Hyundai i10 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i10 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)