Maintenance
G051600AUN
G052000APA
G052400APA
Brake fluid
Exhaust pipe and muffler
Drive shafts and boots
Check brake fluid level in the brake fluid
reservoir. The level should be between
“MIN” and “MAX” marks on the side of
the reservoir. Use only hydraulic brake
fluid conforming to DOT 3 or DOT 4
specification.
Visually inspect the exhaust pipes, muf-
fler and hangers for cracks, deterioration,
or damage. Start the engine and listen
carefully for any exhaust gas leakage.
Tighten connections or replace parts as
necessary.
Check the drive shafts, boots and clamps
for cracks, deterioration, or damage.
Replace any damaged parts and, if nec-
essary, repack the specified grease.
Consult an authorized HYUNDAI dealer
for details.
G051700AUN
G052100AUN
G052500AUN
Parking brake
Suspension mounting bolts
Air conditioning refrigerant
(if equipped)
Inspect the parking brake system includ-
ing the parking brake pedal and cables.
Check the suspension connections for
looseness or damage. Retighten to the
specified torque.
Check the air conditioning lines and con-
nections for leakage and damage.
G051800APA
Rear brake drums and linings
G052200AUN
Check the rear brake drums and linings Steering gear box, linkage &
for scoring, burning, leaking fluid, broken boots/lower arm ball joint
parts, and excessive wear.
With the vehicle stopped and engine off,
check for excessive free-play in the
steering wheel.
G051900AUN
Brake discs, pads, calipers and
rotors
Check the linkage for bends or damage.
Check the dust boots and ball joints for
deterioration,
cracks,
or
Replace any damaged parts.
damage.
Check the pads for excessive wear, discs
for run out and wear, and calipers for fluid
leakage.
7
24
| Categories | Hyundai Manuals, Hyundai i10 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i10 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)