DO-IT-YOURSELFMAINTENANCE 6
7
Theengineoilandfiltershouldbechanged
at those intervals specified in the
maintenance schedule in Section 5. If the
car is being driven in severe conditions,
more frequent oil and filter changes are
required.
(2.4L)
The procedure for changing the oil and
filter is as follows:
1.
Park the car on level ground and set the
parking brake. Start the engine and let
itwarmupuntiltheneedleonthecoolant
temperature gauge moves above the
lowest mark. Turn the engine off and
place the gear selector lever in "P" (au-
tomatic) or reverse gear (manual
transaxle).
HNF5005-1
HNF5006-1
3.
Slide underneath the car and loosen
the drain plug by turning it counter-
clockwise with a wrench of the proper
size. Be sure that a drain pan is in
position to catch the oil as it drains out,
then remove the drain plug.
(3.3L)
2.
Open the hood and remove the engine
oil filler cap.
NOTE:
!
Beverycarefulwhendrainingtheengine
oil as it may be hot enough to burn you!
Loosen the oil filter cap by turning it
counterclockwise to drain well the oil in
the oil filter (3.3L only).
WARNING:
G040B01NF
4.
When the oil has stopped draining,
replace the drain plug using a new
gasket and retighten by turning it clock-
wise.
Oilpandrainplugtighteningtorque:
25.3
~ 32.5 lb.ft (3.5 ~ 4.5 kgf.m)
| Categories | Hyundai Manuals, Hyundai Sonata Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Sonata |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)