6 DO-IT-YOURSELFMAINTENANCE
CHECKINGANDREPLACING
FUSES
CHECKINGDRIVEBELTS
22
G190A02NF-GAT
Drive belts should be checked periodi-
cally for proper tension. At the same time,
beltsshouldbeexaminedforcracks,wear,
fraying or other evidence of deterioration
and replaced if necessary.
G200A01A-AAT
Replacing a Fusible Link
(
2.4L)
Powersteeringpump
Auto tensioner
When a new belt is replaced, the belt
should be located within the pulley of flat
idler.
Generator
Water
pumppully
Belt routing should also be checked to be
sure there is no interference between the
belts and other parts of the engine.
Compressor
Damperpulley
NOTE:
G140D01NF
Drive belt tension is adjusted automati-
cally by the auto tensioner.
(
3.3L) Water pump pully
ONF078020
Afusiblelinkwillmeltiftheelectricalcircuits
from the battery are ever overloaded, thus
preventing damage to the entire wiring
harness. (This could be caused by a short
in the system drawing too much current.) If
this ever happens, have a Hyundai dealer
determine the cause, repair the system
and replace the fusible link. The fusible
links are located in a relay box in the
engine compartment for easy inspection.
Generator
Auto tensioner
Powersteering
Damperpulley Compressor
G140D02NF
| Categories | Hyundai Manuals, Hyundai Sonata Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Sonata |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)