Xenon headlamps
Parking lamps, roadside parking
lamps, daytime running lights
H8 bulb, 35 watts
3.
Slide the bulb out of the holder and pull off
the connector.
4.
5.
Replace the bulb and attach the connector.
Insert the bulb holder and turn it all the way
in the opposite direction.
The figure shows the right-hand headlamp.
6.
Attach the headlamp cover.
1.
2.
3.
4.
Remove the headlamp cover.
Turn signals, front
Turn the bulb, see arrow, and remove it.
Pull off the connector and replace the bulb.
PY21W bulb, 21 watts
The turn signal bulb can be changed via a cover
in the wheel arch.
Attach the connector, insert the bulb and
turn it all the way in the opposite direction.
5.
Attach the headlamp cover.
Corner-illuminating lamps
H3 bulb, 55 watts
The figure shows the right-hand headlamp.
1.
Remove the top headlamp cover, using the
screwdriver to push the detents to one side.
1.
2.
Turn the respective wheel inwards.
Using a coin, turn both locks of the cover all
the way to the left, arrows 1, and remove the
cover.
3.
4.
Turn the bulb holder to the left and remove
it, arrow 2.
Apply gentle pressure to the bulb while
turning it to the right for removal and
replacement.
2.
Turn the bulb holder, see arrow, and
remove it.
5.
6.
Insert the bulb holder and lock it by turning
it to the right.
Attach the cover by positioning the bottom
edge first and then turning both locks all the
way to the right.
134
Online Edition for Part no. 01 41 2 604 079 - © 02/10 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BME E81, BMW 128i, BMW 135i, BMW E82, BMW E87, BMW E88 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4 out of 4)
Automotive readers have rated 2011 BMW 1-Series 128i 135i E81 E82 E87 E88 Coupe Owners Manual Without i Drive 4.0 out of 4.0 based on 3 product reviews.