Side turn signals
6
7
8
Turn signal
W5W bulb, 5 watts
Backup lamp
1.
Press the rear edge of the lamp toward the
front with your fingertip, arrow 1 and pivot it
out, arrow 2.
Brake Force Display lamp
Replacing tail lamps
Outer brake lamp
2.
3.
While simultaneously lifting the retaining
tab, rotate bulb holder to the left and
remove.
The outer brake lamp can be accessed through
a single socket.
Remove lamp and replace it.
To install, insert front end of the lamp and press
into place at the back.
The figure shows the right side of the vehicle.
1.
2.
3.
Remove the cover from the panel of the
cargo area.
Tail lamps
Turn the bulb holder to the left, see arrow,
and remove it.
>
>
>
>
Turn signal:
PY21W bulb, 21 watts
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
Backup lamp:
W16W bulb, 16 watts
Brake lamps:
P21W bulb, 21 watts
4.
5.
Attach the bulb holder and turn it all the way
in the opposite direction.
Brake Force Display lamp:
H21W bulb, 21 watts
Reattach the cover.
The roadside parking lamp/tail lamp uses
LED design. After replacing the bulb,
ensure that the bulb holder is properly seated;
otherwise, the roadside parking lamp/tail lamp
may not work.<
1
2
3
4
5
Inner brake lamp
Outer brake lamp
Lateral reflector
Roadside parking lamp and tail lamp LED
Reflector
216
Online Edition for Part no. 01 41 2 604 129 - © 02/10 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E81, BMW E82, BMW E87, BMW E88 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)