8.
Attach the handle of the screwdriver to the
Allen wrench and insert the wrench into the
opening provided.
3.
Position both locking pins of one side at the
openings provided for them.
4.
5.
Press the wind deflector into the openings,
arrows 3, overcoming the tension in the
springs, and push the free locking pin in the
same direction, arrow 4.
9.
Turn the Allen wrench all the way to the left,
arrow 7, until the front convertible top frame
is locked to the windshield frame. The rear
convertible top frame is automatically
pressed down onto the convertible top box
cover and is sealed tight under tension.
Position the free locking pins at the corre-
sponding openings and let the spring ten-
sion lock the wind deflector in place,
arrow 5.
The closing procedure must be fully com-
pleted; otherwise, injury or damage may
occur.<
Please contact your BMW center to have the
cause of the malfunction eliminated.
Wind deflector*
The wind deflector keeps air currents in the
passenger compartment at a low level when the
convertible top is down and provides for an
even more pleasant journey at higher speeds.
6.
Fold up the top section of the wind deflec-
tor, arrow 6.
Installation
With the wind deflector installed: do not
recline the front-seat backrests too far if
the seat is to be slid all the way back, as this
1.
Remove the wind deflector from the protec-
tive cover and unfold it, arrows 1.
would damage the wind deflector.<
Removing the wind deflector
Proceed in the reverse order as used for instal-
lation.
2.
Press together the top and bottom parts of
the wind deflector until the catch engages,
arrow 2.
41
Online Edition for Part no. 01 41 2 604 129 - © 02/10 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E81, BMW E82, BMW E87, BMW E88 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)