Manually unlocking parking lock
In the event of a power supply interrup-
tion such as a discharged or discon-
nected battery or an electrical malfunction, the
parking lock must be manually unlocked; other-
wise, the rear wheels are immobilized and the
vehicle cannot be towed.<
Only unlock the parking lock manually for tow-
ing and make sure to set the parking brake
forcefully beforehand so that the vehicle cannot
roll. Lock the parking lock again after the vehicle
is parked.
5.
6.
Rotate allen wrench until it reaches the
stop, arrow 2. The parking lock is unlocked.
Do not turn allen wrench in the oppo-
site direction; otherwise, you may
damage the mechanism.<
Releasing
1.
2.
Unclip the sleeve of the selector lever.
Remove allen wrench from the opening.
Pull the sleeve up over the selector lever
until the sleeve is inside out.
After parking the vehicle, lock the parking
lock again. Otherwise, there is a danger
that the vehicle will roll.<
Locking
1.
Press the button, see arrow.
The parking lock is locked again.
3.
Using the allen wrench from the toolkit,
refer to page 213, rotate the cover until it
reaches the stop, arrow 1, and remove,
arrow 2.
2.
3.
Replace cover again.
Clip the selector lever sleeve back into
place.
4.
Forcefully apply the parking brake.
Jump-starting and towing, starting on
page 220.
4.
Insert allen wrench into the opening,
arrow 1.
63
Online Edition for Part no. 01 41 2 604 129 - © 02/10 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E81, BMW E82, BMW E87, BMW E88 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)