Interior equipment
Integrated universal remote
control*
Programming
The concept
This system can replace up to three different
hand-held transmitters for various types of re‐
mote-controlled equipment, such as garage
doors or lighting systems.
The hand-held transmitter signal can be pro‐
grammed on one of the three memory buttons.
1
2
Memory buttons
LED
The corresponding device can then be operated
using the programmed memory button.
The LED indicates that a signal is being trans‐
mitted.
Fixed-code hand-held transmitters
1.
2.
Switch on the ignition.
Initial setup:
When selling the vehicle, delete the stored pro‐
grams for security reasons.
Press both outer buttons 1 for ap‐
prox. 20 seconds until the LED flashes.
During programming
During programming and before activat‐
ing a device using the universal remote control,
ensure that there are no people, animals, or ob‐
jects in the range of movement of the remote-
controlled device; otherwise, there is a risk of
injury or damage.
All programs of the three memory buttons 1
are cleared.
3.
4.
Hold the hand-held transmitter at a distance
of approx. 2 to 8 in/5 to 20 cm from the mem‐
ory buttons.
Also follow the safety instructions of the hand-
held transmitter.◀
Simultaneously press the transmit button of
the hand-held transmitter and the memory
button of the universal remote control.
Compatibility
The LED flashes slowly.
If this symbol is printed on the packaging
or in the instructions of the hand-held
transmitter, the remote-controlled de‐
vice is generally compatible with the universal
remote control.
5.
Release both buttons when the LED flashes
rapidly.
If the LED does not flash rapidly after approx.
15
seconds, change the distance and repeat
the step.
If you have any questions, please contact:
The device can be operated using the memory
button with the engine running or the ignition
switched on.
▷
▷
Your service center.
www.homelink.com on the Internet.
Malfunction
If the device cannot be used after repeated at‐
tempts at programming, please check whether
the hand-held transmitter is equipped with an
alternating code system.
101
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW E89, BMW sDrive34i, BMW Z4, BMW Z4 sDrive, BMW Z4 sDrive30i |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)