light is switched on, the condensation evapo‐
rates after a short time. The headlamp glasses
do not need to be changed.
3.
Turn the bulb by approx. 90°, see arrow 1,
and pull it out, see arrow 2.
If there is a large amount of moisture, e.g., water
droplets form in the lamp, have the lamp
checked by your service center.
Xenon headlamps
Because of the long life of these bulbs, the like‐
lihood of failure is very low. Switching the lamps
on and off frequently shortens their life.
4.
Disconnect the plug, change the bulb and
reconnect the plug.
Do not perform work/bulb replacement on
xenon headlamps
5.
6.
Insert the bulb and turn it until it stops.
Have any work on the xenon lighting system, in‐
cluding bulb replacement, performed only by a
service center.
Screw on the access cover tightly by turning
it to the right.
Due to the high voltage present in the system,
there is the danger of fatal injuries if work is car‐
ried out improperly.◀
Attach the access cover carefully
Be careful when attaching the access
cover; otherwise, it may leak, causing damage to
the headlamp system.◀
Parking and roadside parking lamps,
daytime running lights
Turn signals, front
H8 bulb, 35 watts
P24W bulb, 24 watt
1.
Switch off the lamps and take the remote
control out of the ignition lock.
1.
Turn the wheel outwards.
2.
Turn the upper access cover to the left and
remove it, see arrow.
2.
Turn both locks in the wheel house to the left
and remove the cover.
205
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW E89, BMW sDrive34i, BMW Z4, BMW Z4 sDrive, BMW Z4 sDrive30i |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)