Accelerating using the lever
Cruise control is not deactivated by depressing
the accelerator pedal. Once the accelerator
pedal is released, the stored speed is achieved
again and maintained.
Accelerating slightly:
Press the lever to the resistance point, arrow 1,
and hold until the desired speed is reached.
Accelerating significantly:
Warning lamp
Press the lever beyond the resistance point, ar‐
row 1, and hold until the desired speed is
reached.
A message appears on the Control
Display.
The warning lamp comes on, for ex‐
ample, when cruise control has been deacti‐
vated as a result of DSC intervention.
The vehicle accelerates without pressure on the
accelerator pedal. The system stores and main‐
tains the speed.
Deactivating the system
Decreasing speed
▷
Press the lever upward or downward twice,
arrow 3.
Repeatedly pull the lever to the resistance point
or beyond, arrow 2, until the desired speed is
displayed.
▷
Switch off the ignition.
The stored speed is cleared.
▷
Each time the lever is pulled to the resist‐
ance point, the desired speed is decreased
by approx. 1 mph/1 km/h.
Resuming a speed stored beforehand
Press the button, arrow 4. The last stored speed
is resumed and maintained.
▷
Each time the lever is pulled beyond the re‐
sistance point, the desired speed is reduced
by up to 5 mph or 10 km/h until the minimum
speed of 20 mph/30 km/h is achieved.
Displays in the instrument cluster
The system stores and maintains the speed.
Interrupting the system
Tap the lever upwards or downwards, arrow 3.
The displays in the speedometer change color.
In addition, the system is automatically deacti‐
vated:
▷
▷
When you brake the vehicle.
When you switch gears very slowly or shift
to neutral in cars with a manual transmis‐
sion.
1
2
Stored speed
Selected speed is displayed briefly
If --- mph or --- km/h temporarily appears in the
instrument cluster display, it is possible that the
system prerequisites for operation are currently
not met.
▷
▷
When you engage selector lever position N
in cars with an automatic transmission.
When you engage transmission position N
in 7-gear sport automatic transmissions
with a dual clutch.
Call up Check Control messages, refer to
page 72.
▷
▷
When you activate the Dynamic Traction
Control DTC or deactivate DSC.
Malfunction
When DSC or ABS is intervening.
The warning lamp comes on when the
system has failed.
92
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW E89, BMW sDrive34i, BMW Z4, BMW Z4 sDrive, BMW Z4 sDrive30i |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)