function is only available while the engine is run‐
ning.
When the AUTO program is
switched on, the climate level of the
AUTO program can be selected us‐
ing the buttons for controlling the manual air
flow rate.
The cooling function helps to prevent conden‐
sation on the windows or to remove it quickly.
Depending on the weather, the windshield may
fog over briefly when the engine is started.
The selected climate level is displayed by an
LED.
The cooling function is switched on automati‐
cally with the AUTO program.
Convertible program
Maximum cooling
When the hardtop is open, the convertible pro‐
gram is activated as well. In the convertible pro‐
gram, the automatic climate control is optimized
for driving with the hardtop open. In addition, the
air flow rate is increased as vehicle speed in‐
creases.
The air is cooled by the maximum
amount at an external temperature
above 32 ℉/0 ℃ and with the en‐
gine running.
The automatic climate control goes into recir‐
culated air mode at the lowest temperature. Air
flows at maximum rate from the vents for the
upper body area. You should therefore open the
vents for maximum cooling.
The effectiveness of the convertible program
can be enhanced considerably by installing the
wind deflector.
Adjusting air flow rate manually
Press the left side of the button to
reduce air flow. Press the right side
of the button to increase it.
AUTO program
TheAUTOprogramautomaticallyadjuststheair
distribution to the windshield and side windows,
toward the upper body area, and into the foot‐
well and knee area.
The air volume may be reduced automatically to
save battery power. The display remains the
same.
The air flow rate and air distribution, in addition
to your temperature specifications, will be
adapted to outside influences as a result of sea‐
sonal changes, e.g., sunlight or window conden‐
sation.
Switching the system on/off
With the blower at its lowest setting, press the
left side of the button to switch off the automatic
climate control. All displays are cleared except
for the rear window defroster if it is switched on.
The cooling function is switched on automati‐
cally with the AUTO program.
Press any button except the rear window de‐
froster to reactivate the automatic climate con‐
trol.
Switching on/off
Press the button.
Manual air distribution and air flow
rate are activated when the AUTO program is
deactivated.
Residual heat
The heat stored in the engine is used to heat the
interior.
AUTO program climate level
This function can be switched on
using the right-hand button under
the following conditions:
The climate levels can be used to vary the in‐
tensity when the AUTO program is switched on.
For example, air flow is adjusted automatically
to optimize climate control.
▷
Up to 15 minutes after switching off the en‐
gine.
99
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW E89, BMW sDrive34i, BMW Z4, BMW Z4 sDrive, BMW Z4 sDrive30i |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)