2011 Hyundai Accent Owners Manual

CONSUMERINFORMATION,REPORTINGSAFETYDEFECTS&BINDINGARBITRATIONOFWARRANTYCLAIMS 8
7
1.
2.
Manufacturer or Brand name
o Manufacturer  or Brand  name is
shown.
Tire size (example: P175/70R14)
o The "P"  indicates the  tire is  de-
signed for passenger vehicles. A
"T" is the designation for a tempo-
rary spare tire.
o Three-digit  number  (175):  This
number gives the width in millime-
ters of the tire from sidewall edge
to sidewall edge.
o Two-digit number (70): This num-
ber, known  as  the aspect  ratio,
gives the  tire's ratio of  height to
width.
o R: The "R" stands  for radial.
o Two-digit number (14): This num-
ber is the wheel or rim diameter in
inches.
o Two (or three) digit number (84):
This number is the  tire's load in-
dex. It is a  measurement of how
much weight  each tire  can sup-
port.
o T: Speed Rating. The speed  rat-
ing denotes the speed at which a
tire is  designed to  be driven  for
extended  periods  of  time.  The
ratings range from "A"  to "Z" (98
to 186 MPH).
3. TIN (Tire Identification Number) for
new  tire  (example:  DOT  XX  XX
XXX XXXX)
o DOT:  Abbreviation  for the  "De-
partment of Transportation". The
symbol can be placed above, be-
low or to the left or right of the Tire
Identification  Number.  Indicates
tire is in compliance with the U.S.
Department   of   Transportation
Motor Vehicle Safety Standards.
o 1st two-digit code: Manufacturer's
identification mark
o 2nd two-digit code: Tire size
o 3rd three-digit code: Tire type code
(Optional)
o 4th four-digit code: Date of Manu-
facture
o  Four numbers represent the week
and year  the  tire was  built. For
example,    the  numbers    3109
means the 31st week of 2009.
4. Tire ply  composition and  mate-
rial
The  number of  layers  or  plies of
rubbercoated fabric in the tire. Tire
manufacturers  also must  indicate
the materials  in the  tire, which in-
clude  steel, nylon,  polyester,  and
others.  The letter "R" means radial
ply construction; the letter "D" means
diagonal  or bias  ply  construction;
and the letter "B" means belted-bias
ply construction.
5. Maximum  permissible  inflation
pressure
This number is the greatest amount
of air pressure that should be put in
the tire.  Do not  exceed the  maxi-
mum permissible inflation pressure.
Refer to the Tire and Loading Infor-
mation label for recommended infla-
tion pressure.
Product Specification
Categories Hyundai Manuals, Hyundai Accent Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 282 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Accent
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field