2011 Hyundai Accent Owners Manual

8 CONSUMERINFORMATION,REPORTINGSAFETYDEFECTS&BINDINGARBITRATIONOFWARRANTYCLAIMS
8
6
. Maximum load rating
I030D01JM-AAT
Cold Tire  Pressure: The amount  of
air  pressure  in  a  tire, measured  in
pounds   per   square  inch   (psi)   or
kilopascals  (kPa)  before  a  tire  has
built up heat from driving.
TIRE TERMINOLOGY AND DEFINI-
This  number  indicates  the  maxi-
mum load in kilograms and pounds
that can be carried by the tire. When
replacing the  tires on  the vehicle,
always use a tire that has the same
load rating as  the factory installed
tire.
TIONS
Air Pressure: The amount of air inside
the tire pressing  outward on the  tire.
Air pressure  is expressed in  pounds
persquareinch(psi)orkilopascal   (kPa).
Accessory Weight: This  means the
combined weight of optional accesso-
ries. Some  examples of optional  ac-
cessories are, automatic transmission,
power seats, and air conditioning.
Aspect Ratio:  The relationship  of a
tire's height to its  width.
Belt: A  rubber coated layer of  cords
that is located between  the plies and
the tread.  Cords may be  made from
steel or other reinforcing materials.
Bead:  The tire  bead  contains  steel
wires wrapped by steel cords that hold
the tire onto the  rim.
Curb Weight: This means the weight
of a motor  vehicle with standard and
optional equipment including the maxi-
mum capacity of fuel, oil and coolant,
but without passengers and cargo.
DOT Markings:  A code molded  into
the sidewall of a tire signifying that the
tire  is  in  compliance  with  the  U.S.
Department  of Transportation  motor
vehicle  safety  standards.  The  DOT
code  includes the  Tire  Identification
Number (TIN), an alphanumeric desig-
nator which  can also identify  the tire
manufacturer, production plant, brand
and date of production.
7. Uniform   Tire  Quality   Grading
(UTQG):
Tire manufacturers are required to
grade tires based  on three perfor-
mance factors: treadwear,  traction
and  temperature  resistance.   For
more information, see Uniform Tire
Quality Grading on page 8-15.
GVWR: Gross Vehicle Weight Rating
GAWR FRT: Gross Axle Weight Rat-
ing for the front  Axle.
GAWR RR: Gross Axle Weight Rating
for the rear axle.
Bias  Ply  Tire:  A  pneumatic  tire in
which  the plies  are laid  at  alternate
angles  less than  90  degrees to  the
centerline of the tread.
Product Specification
Categories Hyundai Manuals, Hyundai Accent Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 282 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Accent
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field