FEATURESOFYOURHYUNDAIFEATURESOFYOURHYUNDAI1
65
65
D150312AUN
Automatic Transaxle Position
B260G01A-AAT
Low Oil Pressure Warning
B260H03A-AAT
Parking Brake/
Indicator Light (If Installed)
Light
Low Brake Fluid Level
Warning Light
The indicator displays which automatic
transaxle shift position is selected.
!
!
CAUTION:
CAUTION:
Iftheoilpressurewarninglightstayson
while the engine is running, serious en-
gine damage may result. The oil pres-
sure warning light comes on whenever
there is insufficient oil pressure. In nor-
mal operation, it should come on when
the ignition switch is turned on, then go
out when the engine is started. If the oil
pressure warning light stays on while
the engine is running, there is a serious
malfunction.
If you suspect brake trouble, have your
brakes checked by a Hyundai dealer as
soon as possible. Driving your car with
a problem in either the brake electrical
system or brake hydraulic system is
dangerous, and could result in serious
injury or death.
Manual Transaxle Shift Indi-
cator (If Installed)
This indicator informs you which gear is
desired while driving to save fuel.
For example:
:
Indicates that shifting up to the 3rd
gear is desired (currently the shift
lever is in the 2nd gear).
Indicates that shifting down to the
3rd gear is desired (currently the
shift lever is in the 4th gear).
Warning Light Operation
If this happens, stop the car as soon as
itissafetodoso,turnofftheengineand
check the oil level. If the oil level is low,
fill the engine oil to the proper level and
start the engine again. If the light stays
on with the engine running, turn the en-
gine off immediately. In any instance
where the oil light stays on when the
engine is running, the engine should be
checked by a Hyundai dealer before the
car is driven again.
:
The parking brake/brake fluid level warn-
ing light should come on when the park-
ing brake is applied and the ignition switch
is turned to "ON" or "START". After the
engine is started, the light should go out
when the parking brake is released.
If the parking brake is not applied, the
warning light should come on when the
ignition switch is turned to "ON" or
"START", then go out when the engine
starts.
NOTE :
When the system is not working prop-
erly,up&downarrowindicatorwillblink
(
Gear is not displayed.).
| Categories | Hyundai Manuals, Hyundai Accent Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Accent |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)