JC ENG 4A.QXP 9/7/2010 11:38 AM Page 49
Features of your vehicle
Engine oil level warning
light
Turn signal indicator
High beam indicator
The blinking green arrows on the instru-
ment panel show the direction indicated
by the turn signals. If the arrow comes on
but does not blink, blinks more rapidly
than normal, or does not illuminate at all,
it indicates a malfunction in the turn sig-
nal system.You should consult your deal-
er for repairs.
The engine oil level warning light illumi-
nates when the engine oil level should be
checked.
This indicator illuminates when the head-
lights are on and in the high beam posi-
tion or when the turn signal lever is pulled
into the Flash-to-Pass position.
If the warning light comes on, check the
engine oil level as soon as possible and
add engine oil as required.
Low Beam Indicator
Slowly pour the recommended oil little by
little into a funnel. (Oil refill capacity :
approximately 0.6 ~ 1.0 l)
This indicator also blinks when the haz-
ard warning switch is turned on.
This indicator illuminates when the head-
lights are on and in the low beam posi-
tion.
Use only the specified engine oil. (Refer
to "Recommended lubricants and capac-
ities" in section 8.)
Do not overfill the engine oil. Make sure
the oil level is not above F (Full) mark on
the dipstick.
✽
NOTICE
�
If you drive approximately 50 km
after adding engine oil, the warning
light will go off.
Cycle the ignition from OFF to ON 3
times within 10 seconds, the warning
light will go off immediately. However,
when you turn off the warning light
without adding engine oil, the light
will come on again after driving
approximately 50 km.
�
4
49
| Categories | Hyundai Manuals, Hyundai ix20 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix20 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)