JC ENG 7.QXP 9/7/2010 11:59 AM Page 32
Maintenance
Automatic transaxle fluid
(if equipped)
Parking brake
Steering gear box, linkage &
boots/lower arm ball joint
Inspect the parking brake system includ-
ing the parking brake pedal and cables.
The fluid level should be in the "HOT"
range of the dipstick, after the engine
and transaxle are at normal operating
With the vehicle stopped and engine off,
check for excessive free-play in the
steering wheel.
Brake discs, pads, calipers and
rotors
temperature.
Check
the
automatic
Check the linkage for bends or damage.
Check the dust boots and ball joints for
transaxle fluid level with the engine run-
ning and the transaxle in neutral, with the
parking brake properly applied.
Check the pads for excessive wear, discs
for run out and wear, and calipers for fluid
leakage.
deterioration,
cracks,
or
Replace any damaged parts.
damage.
For more information on checking the
pads or lining wear limit, refer to the
Hyundai web site.
Brake hoses and lines
Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.
(http://brakemanual.hmc.co.kr)
Suspension mounting bolts
Check the suspension connections for
looseness or damage. Retighten to the
specified torque.
Brake fluid
Check brake fluid level in the brake fluid
reservoir. The level should be between
“MIN” (Minimum) and “MAX” (Maximum)
marks on the side of the reservoir. Use
only hydraulic brake fluid conforming to
DOT 3 or DOT 4 specification.
7
32
| Categories | Hyundai Manuals, Hyundai ix20 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix20 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)