JC ENG 7.QXP 9/7/2010 12:02 PM Page 73
Maintenance
2.
3.
4.
Remove the headlight bulb cover by
turning it counterclockwise.
Disconnect the headlight bulb socket-
connector.
Unsnap the headlight bulb retaining
wire by depressing the end and push-
ing it upward.
5.
6.
Remove the bulb from the headlight
assembly.
Install a new headlight bulb and snap
the headlight bulb retaining wire into
position by aligning the wire with the
groove on the bulb.
OJC070032
OJC070029
Position light
Turn signal light
7.
8.
Connect the headlight bulb socket
connector.
1. Remove the headlight bulb cover by
turning it counterclockwise.
1. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
Install the headlight bulb cover by turn-
ing it clockwise.
2. Remove the socket from the assembly
by pulling it out.
2.
Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket
3.
Remove the bulb by pulling it straight
out.
Insert a new bulb into the socket.
4.
5.
Install the socket into the assembly by
pushing it in.
3.
4.
Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
7
73
| Categories | Hyundai Manuals, Hyundai ix20 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix20 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)