JC ENG 5.QXP 9/7/2010 11:51 AM Page 18
Driving your vehicle
MANUAL TRANSAXLE (IF EQUIPPED)
Manual transaxle operation
CAUTION
The manual transaxle has 5 (6, if
equipped) forward gears.
•
When downshifting from 5th
(Fifth) gear to 4th (Fourth) gear,
caution should be taken not to
inadvertently move the shift lever
sideways in such a manner that
second gear is engaged. Such a
drastic downshift may cause the
engine speed to increase to the
point that the tachometer will
enter the red-zone. Such over-
revving of the engine may possi-
bly cause engine and transaxle
damage.
This shift pattern is imprinted on the shift
knob. The transaxle is fully synchronized
in all forward gears so shifting to either a
higher or a lower gear is easily accom-
plished.
■
Type A
Depress the clutch pedal down fully while
shifting, then release it slowly.
N
N
If your vehicle is equipped with an igni-
tion lock system, the engine will not start
■
Type B
when
starting
the
depressing the clutch pedal.
engine
without
The shift lever must return to the Neutral
position before shifting into R (Reverse).
•
Do not downshift more than 2
gears or downshift the gear when
the engine is running at high
speed (5,000 RPM or higher).
Such a downshifting may damage
the engine and the transaxle.
The button (1) located immediately below
the shift knob must be pulled upward
while moving the shift lever to the R
(Reverse) position.
The shift lever can be moved without pulling
the button (1).
The button (1) must be pulled up while mov-
ing the shift lever.
Make sure the vehicle is completely
stopped before shifting into R (Reverse).
OED050001
Never operate the engine with the
tachometer (rpm) in the red zone.
*
The actual shift lever in the vehicle may
differ from the illustration.
5
18
Product Specification
Categories | Hyundai Manuals, Hyundai ix20 Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, ix20 |
Document File Type | |
Copyright | Attribution Non-commercial |