2011 Hyundai Santa Fe Owners Manual

Features of your vehicle
Manual heating and air condition-
ing
Face-Level
The heating  and cooling system  can be
controlled manually  by pressing  buttons
or turning  knob(s) other  than the  AUTO
button.  In this  case,  the  system  works
sequentially  according  to  the   order  of
buttons or knob(s) selected.
Air flow is directed toward the upper body
and face. Additionally, each outlet can be
controlled  to   direct  the  air  discharged
from the outlet.
1.
2.
Start the engine.
Set the mode to the desired position.
Bi-Level
To improve  the effectiveness  of heat-
ing and cooling;
Air flow is  directed towards the face  and
the floor.
OCM052104
-
-
Heating:
Cooling:
Mode selection
The  mode selection  button controls  the
direction of the air flow through the venti-
lation system.
The air  flow  outlet port  is  converted as
follows:
3.
4.
5.
6.
Set  the   temperature  control   to  the
desired position.
Set the air intake control to the outside
(fresh) air position.
Set   the  fan   speed   control   to   the
desired speed.
If air  conditioning  is desired,  turn the
air conditioning system on.
Floor-Level
Most  of  the  air  flow  is directed  to  the
floor, with a small amount of the air being
directed to  the windshield and  side win-
dow defrosters.
Press the  AUTO button  in order to  con-
vert to  full automatic  control of  the sys-
tem.
Floor/Defrost-Level
Refer to the illustration in the “Manual cli-
mate control system”.
Most of the air flow is directed to the floor
and the  windshield with a  small amount
directed to the side window defrosters.
4
78
Product Specification
Categories Hyundai Manuals, Hyundai Santa Fe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 408 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Santa Fe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field