Driving your vehicle
MANUAL TRANSAXLE (IF EQUIPPED)
E050100AUN
Manual transaxle operation
The manual transaxle has 6 forward
gears.
CAUTION
•
When downshifting from fifth
gear
to fourth gear, caution
should be taken not to inadver-
tently press the gear shift lever
sideways in such a manner that
second gear is engaged. Such a
drastic downshift may cause the
engine speed to increase to the
point that the tachometer will
enter the red-zone. Such over-
revving of the engine may possi-
bly cause engine damage.
Do not downshift more than 2
gears or downshift the gear when
the engine is running at high
speed (5,000 RPM or higher).
Such a downshifting may damage
the engine.
This shift pattern is imprinted on the shift
knob. The transaxle is fully synchronized
in all forward gears so shifting to either a
higher or a lower gear is easily accom-
plished.
Press the clutch pedal down fully while
shifting, then release it slowly.
The gearshift lever must be returned to
the neutral position before shifting into R
(Reverse). The ring (1) located immedi-
ately below the shift knob must be pulled
upward while moving the shift lever to the
R position.
The shift lever can be moved without
pulling the ring (1).
•
The ring (1) must be pulled up while
moving the shift lever.
OCM050003
Make sure the vehicle is completely
stopped before shifting into R (Reverse).
Never operate the engine with the
tachometer (rpm) in the red zone.
E050000AUN
5
7
Product Specification
Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Santa Fe |
Document File Type | |
Copyright | Attribution Non-commercial |