Flat tire
250
G Warning
Only use genuine Mercedes-Benz wheel bolts.
Other wheel bolts may come loose.
Do not tighten the wheel bolts when the
vehicle is raised. Otherwise, the vehicle could
fall off the jack.
X Make sure that the base of the jack is
positioned directly under the jacking point.
X Turn ratchet ring spanner? until jack=
sits completely on jacking point; and the
base of the jack lies evenly on the ground.
X Turn ratchet ring spanner? until the tire
is raised a maximum of 1.2 inches (3 cm)
off the ground.
: Wheel bolts for all wheels supplied by the
factory
; Wheel bolts for the "Minispare"
emergency spare wheel
Removing a wheel
X Unscrew the wheel bolts.
! Always use wheel bolts; to mount the
collapsible spare wheel. Using other wheel
bolts to mount the collapsible spare wheel
could damage the brake system.
!
Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damaged when
you screw them in.
G Warning
X Remove the wheel.
Make sure to use the original length wheel
bolts when remounting the original wheel
after it has been repaired.
Mounting a new wheel
G Warning!
Always replace wheel bolts that are damaged
or rusted.
X Clean the wheel and wheel hub contact
surfaces.
!
To prevent damage to the paintwork, hold
Never apply oil or grease to wheel bolts.
the wheel securely against the wheel hub
while screwing in the first wheel bolt.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive under these circumstances! Contact an
authorized Mercedes-Benz Center or call
Roadside Assistance.
Incorrect wheel bolts or improperly tightened
wheel bolts can cause the wheel to come off.
This could cause an accident. Make sure to
use the correct wheel bolts.
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GLK350, Mercedes-Benz X204 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)