Fuses
260
X Release the parking brake.
In the event of damage to the electrical
system
X Switch on the hazard warning flashers
(
Y page 105).
If the battery is defective, the automatic
transmission will be locked in position P. To
shift the automatic transmission to position
N, you must provide power to the vehicle's
electrical system in the same way as when
jump-starting (Y page 256).
i When towing with the hazard warning
flashers switched on, use the combination
switch as usual to signal in which direction
you are changing. In this case, only the
indicator lamps for the direction of travel
flash. When you reset the combination
switch, the hazard warning flashers start
flashing again.
Have the vehicle transported on a transporter
or trailer.
Recovering a vehicle that has become
stuck
Transporting the vehicle
The towing eyes or trailer tow hitch can be
used to pull the vehicle onto a trailer or
transporter if you wish to transport it.
! Pull away smoothly, slowly, and in a
straight line when pulling out a vehicle that
has become stuck. Excessive tractive
power could damage the vehicles.
X Turn the SmartKey to position 2 in the
ignition lock.
X Shift the selector lever to N.
If the drive wheels have become stuck in
loose or muddy ground, pull the vehicle out
with extreme caution, particularly if it is
laden.
As soon as the vehicle has been loaded:
X Prevent the vehicle from rolling away by
applying the parking brake.
Never attempt to recover a stuck vehicle with
a trailer attached.
X Move the selector lever to P.
Pull out the vehicle backwards, if possible
using the tracks it made when it became
stuck.
X Turn the SmartKey to position 0 in the
ignition lock and remove the SmartKey.
X Secure the vehicle.
!
Only lash the vehicle down by the wheels
Fuses
or wheel rims, not by parts of the vehicle
such as axle or steering components.
Otherwise, the vehicle could be damaged.
Important safety notes
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the
components on the circuit and their functions
will fail.
Notes on 4MATIC vehicles
!
Vehicles with 4MATIC must not be towed
with either the front or the rear axle raised,
as doing so will damage the transmission.
G Warning
Only use fuses approved by Mercedes-Benz
with the specified amperage for the system in
question and do not attempt to repair or
bridge a blown fuse. Using other than
approved fuses or using repaired or bridged
fuses may cause an overload leading to a fire,
and/or cause damage to electrical
If the vehicle's transmission, front, or rear
axle is damaged, have the vehicle transported
on a truck or trailer.
components and/or systems. Have the cause
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GLK350, Mercedes-Benz X204 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)