Changing bulbs
116
X Switch off the lights.
X Open the cargo compartment.
Setting the headlamps
X Open the side trim panel (Y page 114).
X Turn the corresponding bulb holder
counter-clockwise and remove it.
X Remove the bulb from the bulb holder.
X Insert the new bulb into the bulb holder.
X Insert the bulb holder and turn it clockwise.
X Close the side trim panel (Y page 114).
License plate lamp
: V vertical axis
; H (horizontal) height, measured from the
center
Setting the headlamps correctly is extremely
important. Setting the high-beam headlamps
also sets the low-beam headlamps. (The term
headlamps covers both high and low beam.)
To check and adapt the headlamp setting,
proceed as follows:
X Park the vehicle on level ground at a
distance of 25 feet (7.6 m) from a wall or
similar.
X Make sure that the vehicle load is in the
normal range.
X Switch off the lights.
X Open the tailgate.
X Remove screws:.
X Remove the license plate lamp.
X Replace the bulb.
X Switch on theL low-beam headlamps.
If the light of the headlamps is not distributed
as shown in the illustration above, follow the
instructions below:
X Insert the license plate lamp.
X Replace and tighten screws:.
X Open the hood (Y page 282).
The adjustment screws are located under the
cover.
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2011 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Waiting to see the file to vove the feedback.