Driving
142
X Depress the brake pedal and keep it
depressed.
X Shift the transmission to position D or R.
X Wait until the gear change is completed
before pulling away.
X Release the parking brake (Y page 159).
X Release the brake pedal.
X Take your foot off the brake pedal.
i Once you have taken your foot off the
brake pedal, the vehicle is held for around
one second.
X Pull away.
Hill start assist will not function if:
Ryou are pulling away on a level road or a
downhill gradient.
X Carefully depress the accelerator pedal.
!
If a warning tone sounds and the
Rthe transmission is in position N.
Release Park. Brake message appears Rthe parking brake is applied.
in the instrument cluster, the parking brake
is still applied. Release the parking brake.
RESP® is malfunctioning.
i The vehicle locks centrally once you have
pulled away. The locking knobs in the doors
drop down.
You can open the doors from the inside at
any time.
You can also deactivate the automatic
locking feature (Y page 217).
i Upshifts take place at higher engine
speeds after a cold start. This helps the
catalytic converter to reach its operating
temperature more quickly.
Hill start assist
Hill start assist helps you when pulling away
forwards or in reverse on an uphill gradient.
It holds the vehicle for a short time after you
have removed your foot from the brake pedal.
This gives you enough time to move your foot
from the brake pedal to the accelerator pedal
and depress it before the vehicle begins to
roll.
G Warning
Never leave the vehicle when it is held by hill
start assist. After approximately one second,
hill start assist will no longer brake your
vehicle and it could roll away.
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2011 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Waiting to see the file to vove the feedback.