7.Connect
the jumper cables in the If your vehicle will not start after a
exact sequence shown in the illus- few attempts, it probably requires
tration. First connect one jumper servicing. In this event please seek
cable to the red, positive (+) qualified assistance. If the cause of
jumper terminal of your vehicle (1). your battery discharging is not
apparent, we recommend that your
vehicle be checked by an authorized
HYUNDAI dealer.
8.Connect
the other end of the
jumper cable to the red, positive
battery/jumper terminal of the
assisting vehicle (2).
the second jumper cable
(+)
9.Connect
ODH063031
to
the
black,
negative
(-)
battery/chassis ground of the
assisting vehicle (3).
10.
Connect the other end of the sec-
ond jumper cable to the black,
negative (-) chassis ground of
your vehicle (4).
6
Do not allow the jumper cables to
contact anything except the cor-
rect battery or jumper terminals
or the correct ground. Do not lean
over the battery when making
connections.
ODH063032
4.Open
5.Open
the engine hood.
the small service cover by a
screwdriver.
11. Start the engine of the assisting
vehicle and let it run at approxi-
mately 2,000 rpm for a few min-
utes. Then start your vehicle.
6.Remove
cover.
the engine room fuse box
6-7
Product Specification
Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Genesis |
Document File Type | |
Copyright | Attribution Non-commercial |
thank you very much for allowing this site