Maintenance
FUSES
■
Blade type
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the driver’s side panel
bolster, the other in the engine com-
partment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will be melted.
If the electrical system does not
work, first check the driver’s side
fuse panel.
WARNING
Fuse replacement
Normal
Blown
• Never replace a fuse with any-
thing but another fuse of the
same rating.
A higher capacity fuse could
cause damage and possibly
cause a fire.
Never install a wire or alu-
minum foil instead of the prop-
er fuse - even as a temporary
repair. It may cause extensive
wiring damage and a possible
fire.
■
Cartridge type
•
•
Normal
Blown
■
Multi fuse
Before replacing a blown fuse, dis-
connect the negative battery cable.
Always replace a blown fuse with
one of the same rating.
CAUTION
Normal
Blown
■ Fusible link
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
diately
consult
an
authorized
HYUNDAI dealer.
Four kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, multi fuse and fusible link
for higher amperage ratings.
Blown
Normal
✽ NOTICE
The actual fuse/relay panel label
may differ from equipped items.
OLMB073029/OBH072060
7-54
Product Specification
Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Genesis |
Document File Type | |
Copyright | Attribution Non-commercial |
thank you very much for allowing this site