Features of your vehicle
Windshield wipers
Operates as follows when the ignition
switch is turned ON.
To vary the speed setting, turn the speed
control knob (1).
If the wiper switch is set in AUTO mode
when the ignition switch is ON, the wiper
will operate once to perform a self-check
of the system. Set the wiper to OFF posi-
tion when the wiper is not in use.
■
Type A
/
MIST : For a single wiping cycle,
move the lever to this (
/
MIST) position and release
it. The wipers will operate
continuously if the lever is
held in this position.
CAUTION
Rain sensor
OEL049900
O / OFF : Wiper is not in operation
When the ignition switch is ON and
the windshield wiper switch is
placed in the AUTO mode, use cau-
tion in the following situations to
avoid any injury to the hands or
other parts of the body:
---
/ INT : Wiper operates intermittently at
the same wiping intervals. Use
this mode in light rain or mist.
To vary the speed setting, turn
the speed control knob.
■ Type B
1
2
/ LO : Normal wiper speed
/ HI : Fast wiper speed
• Do not touch the upper end of the
windshield glass facing the rain
sensor.
NOTICE
•
Do not wipe the upper end of the
windshield glass with a damp or
wet cloth.
✽
If there is heavy accumulation of snow
or ice on the windshield, defrost the
windshield for about 10 minutes, or
until the snow and/or ice is removed
before using the windshield wipers to
ensure proper operation.
Rain sensor
OXM049123
• Do not put pressure on the wind-
shield glass.
Auto control (if equipped)
The rain sensor located on the upper end
of the windshield glass senses the
amount of rainfall and controls the wiping
cycle for the proper interval. The more it
rains, the faster the wiper operates.When
the rain stops, the wiper stops.
4
105
| Categories | Hyundai Manuals, Hyundai i40 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i40 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)