Driving your vehicle
MANUAL TRANSAXLE (IF EQUIPPED)
•
Depress the clutch pedal down fully
while shifting, then release it slowly.
CAUTION
If your vehicle is equipped with an igni-
tion lock switch, the engine will not
start when starting the engine without
depressing the clutch pedal.
The shift lever must return to the neu-
tral position before shifting into R
(Reverse). The button located immedi-
ately below the shift knob must be
pushed upward while moving the shift
lever to the R (Reverse) position.
• When downshifting from 5 (Fifth)
gear to 4 (Fourth) gear, caution
should be taken not to inadver-
tently move the shift lever side-
ways in such a manner that sec-
ond gear is engaged. Such a dras-
tic downshift may cause the
engine speed to increase to the
point that the tachometer will
enter the red-zone. Such over-
revving of the engine may possi-
bly cause engine and transaxle
damage.
•
•
N
Make sure the vehicle is completely
stopped
before
shifting
into
R
The shift lever can be moved without
pushing the button (1).
(Reverse).
Never operate the engine with the
tachometer (rpm) in the red zone.
•
Do not downshift more than 2
gears or downshift the gear when
the engine is running at high
speed (5,000 RPM or higher).
Such a downshifting may damage
the engine.
The button (1) must be pushed while
moving the shift lever.
OVF051004
Manual transaxle operation
•
The manual transaxle has 6 forward
gears.
This shift pattern is imprinted on the
shift knob. The transaxle is fully syn-
chronized in all forward gears so shift-
ing to either a higher or a lower gear is
easily accomplished.
5
19
| Categories | Hyundai Manuals, Hyundai i40 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i40 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)