Maintenance
Brake pads, calipers and rotors
Steering gear box, linkage &
boots/lower arm ball joint
With the vehicle stopped and engine off,
check for excessive free-play in the
steering wheel.
CAUTION
The use of a non-specified fluid
could result in transaxle malfunc-
tion and failure.
Check the pads for excessive wear, discs
for run out and wear, and calipers for fluid
leakage.
For more information on checking the
pads or lining wear limit, refer to the
Hyundai web site.
Use
only
transaxle
specified
fluid.
automatic
Check the linkage for bends or damage.
Check the dust boots and ball joints for
(Refer
to
and
“Recommended
capacities” in section 8.)
lubricants
(http://brakemanual.hmc.co.kr)
deterioration,
cracks,
or
damage.
Replace any damaged parts.
Suspension mounting bolts
Brake hoses and lines
Drive shafts and boots
Check the suspension connections for
looseness or damage. Retighten to the
specified torque.
Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.
Check the drive shafts, boots and clamps
for cracks, deterioration, or damage.
Replace any damaged parts and, if nec-
essary, repack the grease.
Parking brake
Inspect the parking brake system
including the EPB actuator, wiring
and connectors.
Brake fluid
Air conditioning refrigerant/
compressor (if equipped)
Check the air conditioning lines and con-
nections for leakage and damage.
Check brake fluid level in the brake fluid
reservoir. The level should be between
“MIN” and “MAX” marks on the side of
the reservoir. Use only hydraulic brake
fluid conforming to DOT 3 or DOT 4
specification.
7
43
| Categories | Hyundai Manuals, Hyundai i40 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i40 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)